{"title":"Audi RS7 2020 Performance \u0026 Styling Parts","description":"\u003cp\u003eUnleash the Potential of Your Audi C8 RS7 - Performance \u0026amp; Styling Parts\u003c\/p\u003e\n\u003cp\u003eOwning the Audi C8 RS7 Sportback 2020+ with the EA839 V8 engine means you have a luxury performance sedan.\u003c\/p\u003e\n\u003ch3\u003eTransform Your RS7\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost Performance:\u003c\/strong\u003e Unlock even more power from the EA839 twin-turbo V8 with performance exhaust and tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefine the Look:\u003c\/strong\u003e Elevate your RS7 with carbon fiber parts and aggressive aero.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack-Ready Wheels:\u003c\/strong\u003e Complete your build with lightweight forged wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Audi C8 RS7 Sportback 2020+, EA839 4.0L TFSI V8 Engine\u003c\/p\u003e","products":[{"product_id":"audi-c8-4-0t-downpipes-rs6-rs7-s8","title":"Audi C8 4.0T Downpipes - C8 RS6\/RS7 D5 A8\/S8","description":"\u003cp\u003e\u003ciframe title=\"ARM Audi C8 RS6 RS7 Downpipes\" src=\"https:\/\/www.youtube.com\/embed\/mUppuPQFZ0A?si=0MhRW0IHooA0wrci\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe ARM C8 4.0T Downpipes immediately increase power, torque and throttle response on your C8 RS6, RS7 or D5 S8\/A8. By reducing exhaust back-pressure, they let the 4.0T turbos spool faster for more power and torque — especially low in the rev range — and an incredible sound. The OEM downpipes use two large catalysts that choke flow; the ARM downpipes remove that restriction.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGains of up to 41 whp \/ 45 wtq.\u003c\/li\u003e\n\u003cli\u003eFaster turbo spool and an improved exhaust note.\u003c\/li\u003e\n\u003cli\u003eFully reversible.\u003c\/li\u003e\n\u003cli\u003eRemovable midpipe flanges for easier installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eBuilt from SS304 with a 5.75\" CNC-machined V-band flange at the turbos (connects to OEM or upgraded turbos using the same exhaust-side housings), with a centering key to line up perfectly with the OEM or ARM C8 midpipes. The body holds a full 5.5\" until it turns toward the midpipes, gradually reducing to 3\". A removable midpipe flange saves serious install time — secure it to the midpipe first, then connect with a single, easy-to-reach exhaust clamp.\u003c\/p\u003e\n\u003ch3\u003eFitment (4.0T)\u003c\/h3\u003e\n\u003cp\u003eAudi C8 RS6, C8 RS7, D5 S8, D5 A8.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 2x downpipes, 2x midpipe flanges, 2x exhaust clamps, 2x midpipe gaskets, 6x midpipe bolts, 6x midpipe nuts.\u003c\/p\u003e\n\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmissions disclaimer:\u003c\/strong\u003e This product is not legal for sale or use on pollution-controlled vehicles operated on public roads and is intended for off-road, race, or closed-course competition use only. You are responsible for compliance with all applicable emissions laws; use on public roads may violate the Federal Clean Air Act (42 U.S.C. § 7522) and similar state laws. Please check your local laws before purchase and installation.\u003c\/p\u003e\n\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565450395704,"sku":"RSDP","price":547.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/C8-RS6-CATLESS-DOWNPIPES-5.jpg?v=1764379412"},{"product_id":"audi-4-0t-full-intake-system-s6-s7-rs7","title":"AUDI 4.0T STAGE 2 INTAKE SYSTEM - S6 S7 RS7","description":"\u003cp\u003e\u003ciframe title=\"ARM Audi 4.0T Stage 2 Intake System\" src=\"https:\/\/www.youtube.com\/embed\/dq9dkpKYawg?si=15A9b3ECTVgAMq3K\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eLet your Audi 4.0T turbos finally breathe with the ARM 4.0T Stage 2 Intake System. By removing the airflow restriction feeding the turbochargers, it frees up power, spools the turbos faster and adds an aggressive induction note — ideal for OEM, RS and +4mm turbos.\u003c\/p\u003e\n\u003cp\u003eThe system replaces your entire induction setup in two parts: the intake (filters and runner tubes) and the turbo inlets. The inlet portion is the biggest bottleneck in the OEM design, so both must be upgraded together to support Stage 2 and higher tunes — that's exactly what this kit does.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for OEM, RS and +4mm turbos.\u003c\/li\u003e\n\u003cli\u003eGains of up to 27 whp \/ 32 wtq.\u003c\/li\u003e\n\u003cli\u003eFaster turbo spool and improved sound.\u003c\/li\u003e\n\u003cli\u003eSupports Flash Stage 2+ tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eARM full billet inlets:\u003c\/strong\u003e oversized 62mm diameter, perfect from OEM up to +4mm turbos, with the couplers to mate to the ARM intake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum heat shield:\u003c\/strong\u003e seals to the hood and separates cold intake air from engine heat for cooler intake temps.\u003c\/li\u003e\n\u003cli\u003e2x dry filters, 2x intake pipes, 2x silicone couplers, 4x T-bolt clamps, 2x worm clamps, 2x 4.0T inlets, 1x aluminum heat shield.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eAudi S6, S7 \u0026amp; RS7 (C7 and C7.5), 4.0T.\u003c\/p\u003e\n\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\n\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565450985528,"sku":"40TS2DCI","price":947.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/3V0A4863.jpg?v=1764379439"},{"product_id":"audi-4-0t-intake-s6-s7-rs7","title":"Audi 4.0T Intake Heat Shield - S6 S7 RS7","description":"\u003cp\u003eThe ARM 4.0T Intake Heat Shield separates intake air from the heat generated by the engine, so your 4.0T pulls in more cool, fresh air from outside the engine bay.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInsulates intake air from engine heat.\u003c\/li\u003e\n\u003cli\u003eFits the ARM 4.0T Intake.\u003c\/li\u003e\n\u003cli\u003eWrinkle black finish.\u003c\/li\u003e\n\u003cli\u003eNo cutting or trimming — 15-minute installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eDesigned to work with the ARM 4.0T Intake, with two openings for the intake runners to pass through so the shield seals against the hood insulation and keeps cooler air on the filter side. Two integrated mounting points on the underside secure it during aggressive driving.\u003c\/p\u003e\n\u003ch3\u003eFitment (4.0T)\u003c\/h3\u003e\n\u003cp\u003eAudi S6, S7 \u0026amp; RS7 (C7 and C7.5).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e aluminum heat shield, large weatherstripping, small weatherstripping.\u003c\/p\u003e\n\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\n\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565451149368,"sku":"40TDCIHS","price":247.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/3V0A1555.webp?v=1764379446"},{"product_id":"audi-4-0t-catted-downpipes-s6-s7-rs7-a8-s8-1","title":"Audi 4.0T Catted Downpipes - S6 S7 RS7 A8 S8","description":"\u003cp\u003eThe ARM 4.0T Catted Downpipes free your twin-turbo V8 from the two coffee-can catalysts Audi bolts onto the factory 4.0T — the single biggest restriction between your turbos and the road. Swap them in and you can pick up as much as 37whp and 42wtq, with faster turbo spool and a deeper, more present exhaust note.\u003c\/p\u003e\u003ch3\u003eWhere the power comes from\u003c\/h3\u003e\u003cp\u003eThe OEM downpipes don't just choke flow with their dense converters — they're also routed to cross over each other, with the driver-side turbo feeding the passenger-side midpipe and vice versa. That forces exhaust gas down a longer path full of sharp kinks. The ARM 4.0T Catted Downpipes begin and end on the same side, shortening and smoothing the path for quicker spool, more low-end torque, and sharper throttle response.\u003c\/p\u003e\u003ch3\u003eBuilt to outlast the car\u003c\/h3\u003e\u003cp\u003eEach pipe is built from SS304 stainless steel for weld integrity and strength that lasts the life of your 4.0T — you should never need another set. A 200-cell catalyst keeps things far cleaner than a catless setup; pair the downpipes with a CEL delete to avoid a check engine light. Starting at the turbos, they use one solid 4.4\" x 3\" collector welded to an OEM-style 5-bolt flange that bolts up to any 4.0T turbo upgrade. A stainless flex section relieves stress from the turbos under hard acceleration, cornering, and braking, and the OEM transmission mounting brackets are retained to lock everything in place. The downpipes finish with a 2.25\" 3-bolt flange that matches the OEM midpipes or the ARM 4.0T Midpipes.\u003c\/p\u003e\u003ch3\u003eTake the sound further\u003c\/h3\u003e\u003cp\u003eThese downpipes already transform how your 4.0T sounds. If you want more, the ARM 4.0T Midpipes delete the OEM dual resonators Audi uses to muffle the V8 — and since they add only about 10 minutes to the install when done alongside the downpipes, it's the ideal time to fit both.\u003c\/p\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2x ARM 4.0T Downpipes\u003c\/li\u003e\n\u003cli\u003e2x ARM Turbo Gaskets\u003c\/li\u003e\n\u003cli\u003e2x ARM Midpipe Gaskets\u003c\/li\u003e\n\u003cli\u003e10x Replacement Turbo Studs\u003c\/li\u003e\n\u003cli\u003e10x Turbo Stud Nuts\u003c\/li\u003e\n\u003cli\u003e6x Midpipe Bolts\u003c\/li\u003e\n\u003cli\u003e6x Midpipe Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eC7\u003c\/td\u003e\n\u003ctd\u003eS6\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eC7\u003c\/td\u003e\n\u003ctd\u003eS7\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eC7.5\u003c\/td\u003e\n\u003ctd\u003eS6\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eC7.5\u003c\/td\u003e\n\u003ctd\u003eS7\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eD4\u003c\/td\u003e\n\u003ctd\u003eA8\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eD4\u003c\/td\u003e\n\u003ctd\u003eS8\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eC7\u003c\/td\u003e\n\u003ctd\u003eRS7\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eC7.5\u003c\/td\u003e\n\u003ctd\u003eRS7\u003c\/td\u003e\n\u003ctd\u003e4.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions disclaimer:\u003c\/strong\u003e This product is not legal for sale or use on pollution-controlled vehicles operated on public roads and is intended for off-road, race, or closed-course competition use only. You are responsible for compliance with all applicable emissions laws; use on public roads may violate the Federal Clean Air Act (42 U.S.C. § 7522) and similar state laws. Please check your local laws before purchase and installation.\u003c\/p\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565451280440,"sku":"40TDPC","price":777.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/s7downpipe_543faa4d-3617-402c-b312-afdc5729c4d6.png?v=1764379453"},{"product_id":"audi-4-0t-downpipes-s6-s7-s8-rs7","title":"Audi 4.0T Downpipes - S6 S7 RS7 A8 S8","description":"\u003cp\u003eThe ARM 4.0T Downpipes immediately reduce exhaust back-pressure so your Audi 4.0T turbos spool faster and make more power lower in the rev range. The OEM downpipes use two large \"coffee-can\" catalysts that choke flow — and they cross over each other (driver-side turbo to passenger-side midpipe and vice versa), forcing exhaust through a long, kinked path. The ARM downpipes remove that restriction and run straight on the same side for faster spool, more torque and better throttle response.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGains of up to 37 whp \/ 42 wtq.\u003c\/li\u003e\n\u003cli\u003eFaster turbo spool and an improved exhaust note.\u003c\/li\u003e\n\u003cli\u003eFully reversible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eBuilt from SS304 with a one-piece 4.4\" x 3\" collector welded to an OEM-style 5-bolt flange that fits any 4.0T turbo upgrade. A stainless flex section relieves turbo stress, the OEM transmission brackets secure them in place, and they transition to a 2.25\" 3-bolt flange to match the OEM or ARM 4.0T midpipes. Adding the ARM 4.0T Midpipes at install time takes only about 10 extra minutes.\u003c\/p\u003e\n\u003ch3\u003eFitment (4.0T)\u003c\/h3\u003e\n\u003cp\u003eAudi S6, S7 \u0026amp; RS7 (C7\/C7.5), A8 \u0026amp; S8 (D4).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 2x downpipes, 2x turbo gaskets, 2x midpipe gaskets, 10x turbo studs, 10x stud nuts, 6x midpipe bolts, 6x midpipe nuts.\u003c\/p\u003e\n\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmissions disclaimer:\u003c\/strong\u003e This product is not legal for sale or use on pollution-controlled vehicles operated on public roads and is intended for off-road, race, or closed-course competition use only. You are responsible for compliance with all applicable emissions laws; use on public roads may violate the Federal Clean Air Act (42 U.S.C. § 7522) and similar state laws. Please check your local laws before purchase and installation.\u003c\/p\u003e\n\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565451444280,"sku":"40TDP","price":527.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/3V0A2327_d9234288-19fb-4d00-bad4-0b9b28e063f5.jpg?v=1764379458"},{"product_id":"audi-4-0t-inlets-s6-s7-rs7","title":"Audi 4.0T Inlets - S6 S7 RS7","description":"\u003cp\u003e\u003ciframe title=\"ARM Audi 4.0T Inlets\" src=\"https:\/\/www.youtube.com\/embed\/dq9dkpKYawg?si=15A9b3ECTVgAMq3K\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe #1 power-adding bolt-on for your Audi 4.0T. The ARM 4.0T Inlets replace the restrictive OEM inlets to dramatically improve airflow to the turbos — so essential that most tuners require upgraded inlets for any tune above a base Stage 1. Install them and you eliminate the induction restriction, spool the turbos faster, build more low-end torque and make higher peak power.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGains of up to 27 whp \/ 32 wtq.\u003c\/li\u003e\n\u003cli\u003eFaster turbo spool and improved sound.\u003c\/li\u003e\n\u003cli\u003eDirect replacement that supports Stage 2+ tuning.\u003c\/li\u003e\n\u003cli\u003e63mm diameter for precise, maximum-flow fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eA 6-axis machining process produces the largest piping the space allows, holding a 63mm diameter throughout. The machined flanges transition to 63mm aluminum piping and 6-layer reinforced silicone couplers built to resist deformation on demanding builds. The inlets fit any turbo setup that uses the OEM inlets, and even improve on the smaller-diameter RS inlets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires the ARM 4.0T Intake\u003c\/strong\u003e (these inlets do not include filters) — the intake places dual dry media filters (68 cu in each, 136 cu in total) deep in the passenger-side airbox cavity for the coolest air. Add the ARM 4.0T Heat Shield to keep intake temps lower still.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eAudi S6, S7 \u0026amp; RS7 (C7 and C7.5), 4.0T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 2x inlets, 2x silicone hoses, 2x turbo O-rings, 4x turbo bolts, 2x clamps.\u003c\/p\u003e\n\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\n\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565451477048,"sku":"40TIN","price":737.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/product-2_2e59a4d5-88ac-4171-af56-750004657f64.jpg?v=1764379460"},{"product_id":"audi-4-0t-intake","title":"Audi 4.0T Intake - S6 S7 RS7","description":"\u003cp\u003e\u003ciframe title=\"ARM Audi 4.0T Intake\" src=\"https:\/\/www.youtube.com\/embed\/dq9dkpKYawg?si=15A9b3ECTVgAMq3K\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe ARM 4.0T Intake lets your Audi V8 turbos breathe better by improving airflow to the turbochargers. Paired with upgraded turbo inlets it becomes a \"Full Intake\" upgrade — and since the inlets are the main OEM bottleneck, both must be upgraded together to meet the requirements of Stage 2 and higher tunes.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased airflow and faster turbo spool.\u003c\/li\u003e\n\u003cli\u003eImproved sound.\u003c\/li\u003e\n\u003cli\u003eNo cutting or trimming — about a 30-minute install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eTwo dry media filters (not oiled, which can damage MAF sensors) provide 68 cu in each (136 cu in total). They connect to 70mm T6061 aluminum intake runner pipes — 55% larger than the 45mm plastic OEM runners — then to 6-layer reinforced silicone couplers that resist deformation under demanding induction.\u003c\/p\u003e\n\u003ch3\u003eBuild your kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Inlet Couplers\u003c\/strong\u003e — for an S6\/S7 with OEM inlets (70mm to 55mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS Inlet Couplers\u003c\/strong\u003e — for an S6\/S7 with RS inlets, or an RS7 with OEM inlets (70mm to 66mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eARM Inlets\u003c\/strong\u003e — add the ARM 4.0T Inlets and you get the full billet inlet kit with the correct couplers (required for most Stage 2+ tunes).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Shield (optional)\u003c\/strong\u003e — seals to the hood to separate cold intake air from engine heat for lower intake temps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment (4.0T)\u003c\/h3\u003e\n\u003cp\u003eAudi S6, S7 \u0026amp; RS7 (C7 and C7.5).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 2x dry filters, 2x intake pipes, 2x silicone couplers, 4x T-bolt clamps, 2x worm clamps (aluminum heat shield and ARM inlets optional).\u003c\/p\u003e\n\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\n\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565451509816,"sku":"40TDCI","price":527.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/3V0A1526.jpg?v=1764379463"},{"product_id":"audi-4-0t-midpipes-s6-s7","title":"Audi 4.0T Midpipes - S6 S7 RS7 S8 A8\/L","description":"\u003cp\u003e\u003ciframe title=\"ARM Audi 4.0T Midpipes\" src=\"https:\/\/www.youtube.com\/embed\/dsQ_HJsMs-U\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe ARM 4.0T Midpipes open up the incredible sound your C7 4.0T Audi is capable of making. They replace the factory resonated midpipe section with a straight pipe to let more of the twin-turbo V8's note through. A true direct replacement — no cutting or welding — they match up to OEM or upgraded downpipes and catbacks.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved exhaust sound from your 4.0T.\u003c\/li\u003e\n\u003cli\u003eDoes not impact emissions and will not cause a CEL.\u003c\/li\u003e\n\u003cli\u003e304 stainless steel, TIG-welded.\u003c\/li\u003e\n\u003cli\u003eNo cutting or trimming — about a 45-minute install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003e304 stainless tubing measuring 60mm OD to line up with downpipes or catbacks that connect to the factory midpipes, with an OEM-style flex section to reduce torsion on the turbos. The downpipe side uses an OEM-style 3-bolt flange; the catback side bolts to the factory sleeve clamp — so it works with the OEM exhaust or any upgrade that connects to the factory midpipes.\u003c\/p\u003e\n\u003ch3\u003eFitment (4.0T)\u003c\/h3\u003e\n\u003cp\u003eAudi A8 \u0026amp; A8L (D4), S6, S7 \u0026amp; RS7 (C7\/C7.5), S8 (D4).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e ARM 4.0T midpipes, downpipe connection mounting hardware.\u003c\/p\u003e\n\u003cp\u003eBacked by ARM Motorsports' lifetime warranty against defects in craftsmanship and fitment.\u003c\/p\u003e\n\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARM Motorsports","offers":[{"title":"Default Title","offer_id":51565451575352,"sku":"40TMID","price":477.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/3V0A1276_8beb64a5-33e5-455e-97a8-00d7e454b070.jpg?v=1764379465"},{"product_id":"irl-audi-c8-rs7-downpipes","title":"IRL Audi C8 RS7 Downpipes","description":"\u003cp\u003eDitch the restrictive factory cats and wake up your C8 RS7 with the IRL Downpipes. By eliminating backpressure, they let your turbos spool faster for sharper throttle response and maximum power. Works with both stock and aftermarket turbos.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to 30HP increase on stock turbos\u003c\/li\u003e\n\u003cli\u003eSmooth bends for maximum airflow without any drone\u003c\/li\u003e\n\u003cli\u003eElectroplated finish for enhanced, improved durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProfessional installation recommended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEmissions disclaimer:\u003c\/strong\u003e This product is not legal for sale or use on pollution-controlled vehicles operated on public roads and is intended for off-road, race, or closed-course competition use only. You are responsible for compliance with all applicable emissions laws; use on public roads may violate the Federal Clean Air Act (42 U.S.C. § 7522) and similar state laws. Please check your local laws before purchase and installation.\u003c\/p\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"IRL LLC","offers":[{"title":"Catless","offer_id":51571599966264,"sku":"MS-7642-IRL-IRL L-CAT","price":499.0,"currency_code":"USD","in_stock":true},{"title":"200 cel catted","offer_id":51571599999032,"sku":"MS-4502-IRL-IRL L-200","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/6CA0707D-F55C-4193-8EC6-8AAC9A99BD96.png?v=1764366961"},{"product_id":"cts-turbo-c8-audi-rs6-rs7-race-downpipe","title":"CTS Turbo C8 Audi RS6\/RS7 Race Downpipe","description":"\u003cp\u003eCTS Turbo's C8 Audi RS6\/RS7 race downpipe drops seamlessly into the restrictive stock catalytic-converter location immediately after the turbocharger.\u003c\/p\u003e\u003ch3\u003eBuilt to last, built to fit\u003c\/h3\u003e\u003cp\u003eCAD-designed to fit perfectly in place of your factory downpipes and manufactured from T304 stainless steel, hand TIG-welded and back-purged for years of reliable service. Expect substantial power gains, improved exhaust flow and a throatier sound.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent stainless steel\u003c\/li\u003e\n\u003cli\u003eRemovable flange for easy installation\u003c\/li\u003e\n\u003cli\u003eFully TIG-welded design\u003c\/li\u003e\n\u003cli\u003eInstall hardware included\u003c\/li\u003e\n\u003cli\u003eOPF\/GPF temperature sensor ports (with plugs), bypass factory pressure sensors\u003c\/li\u003e\n\u003cli\u003eThroaty sound\u003c\/li\u003e\n\u003cli\u003eStrong power upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStage 2 tuning software is required to avoid a check engine light.\u003c\/p\u003e\u003ch3\u003eInstall notes — vehicles without OPF\/GPF\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTransfer factory O2 sensors and tighten to 30 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eInstall supplied OPF\/GPF plugs and tighten to 25 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eTighten downpipe nuts and bolts to 16 ft\/lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstall notes — ROW vehicles with OPF\/GPF\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove the factory pressure sensors and lines from the factory cats\u003c\/li\u003e\n\u003cli\u003eConnect both ports of the pressure sensor together with the longer factory rubber hose and clamps, then re-install sensors and clip in the harness\u003c\/li\u003e\n\u003cli\u003eInstall OPF\/GPF temperature probes and tighten to 25 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eTransfer factory O2 sensors and tighten to 30 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eTighten downpipe nuts and bolts to 16 ft\/lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions disclaimer:\u003c\/strong\u003e This product is not legal for sale or use on pollution-controlled vehicles operated on public roads and is intended for off-road, race, or closed-course competition use only. You are responsible for compliance with all applicable emissions laws; use on public roads may violate the Federal Clean Air Act (42 U.S.C. § 7522) and similar state laws. Please check your local laws before purchase and installation.\u003c\/p\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":51579815591992,"sku":"CTS-EXH-DP-0049","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/DP-0049.jpg?v=1765846439"},{"product_id":"cts-turbo-c8-audi-rs6-rs7-high-flow-cats","title":"CTS Turbo C8 Audi RS6\/RS7 High-Flow CATS","description":"\u003cp\u003eCTS Turbo's C8 Audi RS6\/RS7 high-flow cats drop seamlessly into the restrictive stock catalytic-converter location immediately after the turbocharger.\u003c\/p\u003e\u003ch3\u003eBuilt to last, built to fit\u003c\/h3\u003e\u003cp\u003eCAD-designed to fit perfectly in place of your factory downpipes and manufactured from T304 stainless steel, hand TIG-welded and back-purged for years of reliable service. Expect substantial power gains, improved exhaust flow and a throatier sound.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent stainless steel\u003c\/li\u003e\n\u003cli\u003eRemovable flange for easy installation\u003c\/li\u003e\n\u003cli\u003eFully TIG-welded design\u003c\/li\u003e\n\u003cli\u003eInstall hardware included\u003c\/li\u003e\n\u003cli\u003eOPF\/GPF sensor ports (with plugs), bypass factory pressure sensors\u003c\/li\u003e\n\u003cli\u003eThroaty sound\u003c\/li\u003e\n\u003cli\u003eStrong power upgrade\u003c\/li\u003e\n\u003cli\u003e200-cell race cats\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStage 2 tuning software is required to avoid a check engine light.\u003c\/p\u003e\u003ch3\u003eInstall notes — vehicles without OPF\/GPF\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTransfer factory O2 sensors and tighten to 30 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eInstall supplied OPF\/GPF plugs and tighten to 25 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eTighten downpipe nuts and bolts to 16 ft\/lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstall notes — ROW vehicles with OPF\/GPF\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemove the factory pressure sensors and lines from the factory cats\u003c\/li\u003e\n\u003cli\u003eConnect both ports of the pressure sensor together with the longer factory rubber hose and clamps, then re-install sensors and clip in the harness\u003c\/li\u003e\n\u003cli\u003eInstall OPF\/GPF temperature probes and tighten to 25 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eTransfer factory O2 sensors and tighten to 30 ft\/lbs\u003c\/li\u003e\n\u003cli\u003eTighten downpipe nuts and bolts to 16 ft\/lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions disclaimer:\u003c\/strong\u003e This product is not legal for sale or use on pollution-controlled vehicles operated on public roads and is intended for off-road, race, or closed-course competition use only. You are responsible for compliance with all applicable emissions laws; use on public roads may violate the Federal Clean Air Act (42 U.S.C. § 7522) and similar state laws. Please check your local laws before purchase and installation.\u003c\/p\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":51579815624760,"sku":"CTS-EXH-DP-0049-CAT","price":1899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/DP-0049-CAT-2.jpg?v=1765846439"},{"product_id":"cts-turbo-c8-audi-rs6-rs7-4-0t-mid-pipes-resonator-delete","title":"CTS Turbo C8 Audi RS6\/RS7 4.0T Mid Pipes\/Resonator Delete","description":"\u003cp\u003e\u003ciframe title=\"CTS Turbo C8 Audi RS6\/RS7 4.0T Mid Pipes Resonator Delete\" src=\"https:\/\/www.youtube.com\/embed\/r5UMl032f34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003eCTS Turbo offers a mid-pipe and resonator delete kit for the Audi C8 RS6\/RS7 4.0T — a direct replacement with no modifications required. The 4.0T V8 sounds great, but even with the valves open it can feel subdued. This kit removes the stock resonator to free up more sound without added drone, delivering a louder, deeper tone the car should have had from the factory. A ceramic heat-wrap underlay keeps as much heat as possible in the exhaust and out of the engine bay.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOE-style heat shielding with ceramic heat-wrap underlay\u003c\/li\u003e\n\u003cli\u003eOE-style flanges and mounting location\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory resonators, no cutting or welding\u003c\/li\u003e\n\u003cli\u003eEasy installation and perfect fitment\u003c\/li\u003e\n\u003cli\u003eFitment for LHD and RHD vehicles\u003c\/li\u003e\n\u003cli\u003eDoes not cause a CEL and does not affect any emission systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEmissions disclaimer:\u003c\/strong\u003e This product is intended for off-road, race, or closed-course competition use only and is not legal for use on pollution-controlled vehicles operated on public roads in most states and provinces. You are responsible for compliance with all applicable emissions laws. Please check your local laws before purchase and installation.\u003c\/p\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":51579817754680,"sku":"CTS-EXH-TP-0016","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/CTS-EXH-TP-0016.jpg?v=1765846480"},{"product_id":"cts-turbo-ignition-coils-4-0-tfsi-ea824","title":"CTS Turbo Ignition Coils - 4.0 TFSI EA824","description":"\u003cp\u003eUpgrade the ignition system on your 4.0 TFSI EA824 with CTS Turbo Ignition Coils — a plug-and-play replacement for the factory coils that delivers a stronger, more consistent spark for better combustion and power delivery. While many owners reach for Audi R8 coils, CTS Turbo's testing showed those offer no real gain over factory; these coils deliver a genuine increase of up to 6% in energy output over stock.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to 6% more energy output\u003c\/li\u003e\n\u003cli\u003eStronger spark for improved throttle response, efficiency, and overall performance\u003c\/li\u003e\n\u003cli\u003eDirect plug-and-play install — remove the old coils and drop these in\u003c\/li\u003e\n\u003cli\u003eReplaces OE part number 079905110P\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2013-2018 Audi C7 S6 \/ S7 \/ RS7\u003c\/li\u003e\n\u003cli\u003e2013-2019 Audi D4 A8 \/ S8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":51579824275512,"sku":"CTS-IGN-010","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/CTS-IGN-010.jpg?v=1765846618"},{"product_id":"cts-turbo-super-core-rs7-turbo-set-for-audi-c7-c7-5-s6-s7-s8-rs6-rs7-4-0tt","title":"CTS Turbo Upgrade for Audi C7 RS7\/S6\/S7\/S8","description":"\u003cp\u003eCTS Turbo's RS7 super core set is a direct replacement for the RS6\/RS7\/S8 4.0T turbos and an upgrade for S6\/S7\/A8 owners, with OEM fit to your factory turbine housing and exhaust manifold. These are brand-new turbochargers — no core charge.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBillet compressor wheel\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory C7 or C7.5 Audi RS6\/RS7\/S8 4.0T turbos\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment\u003c\/li\u003e\n\u003cli\u003eUpgrade for S6\/S7\/A8 4.0T\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAudi C7 S6 4.0T — upgrade (tuning required)\u003c\/li\u003e\n\u003cli\u003eAudi C7 S7 4.0T — upgrade (tuning required)\u003c\/li\u003e\n\u003cli\u003eAudi D4 A8 4.0T — upgrade (tuning required)\u003c\/li\u003e\n\u003cli\u003eAudi C7 RS6 4.0T — direct replacement\u003c\/li\u003e\n\u003cli\u003eAudi C7 RS7 4.0T — direct replacement\u003c\/li\u003e\n\u003cli\u003eAudi D4 S8 4.0T — direct replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf installing on the S6\/S7\/A8, proper tuning software must be used. Note: all TSB parts for turbo replacement must be installed, or warranty will not apply — proof will be required.\u003c\/p\u003e\u003cp\u003eBacked by the CTS Turbo warranty against defects, conditional on all TSB turbo-replacement parts being installed.\u003c\/p\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":51579828994104,"sku":"CTS-RS7-SUPERCORE-SET","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/CTS-RS7.jpg?v=1765846712"},{"product_id":"cts-turbo-adjustable-lowering-links-audi-c8-a6-a7-s6-s7-rs6-rs7-with-air-suspension","title":"Audi C8 Lowering Links by CTS Turbo for Air Suspension","description":"\u003cp\u003e\u003ciframe title=\"Audi C8 Lowering Links by CTS Turbo for Air Suspension\" src=\"https:\/\/www.youtube.com\/embed\/GwECq4QR0Sg\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003eThe CTS Turbo adjustable lowering links bring the stance to your Audi C8 A6, A7, S6, S7, RS6 and RS7 on factory air suspension. They are a direct OEM replacement offering up to 50mm of lowering adjustment, and they adjust right on the vehicle — no need to remove them to change ride height. Made from billet aluminum, they are built for reliability and hard driving.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOEM-style connecting ends\u003c\/li\u003e\n\u003cli\u003eFully adjustable on the vehicle\u003c\/li\u003e\n\u003cli\u003eBillet aluminum\u003c\/li\u003e\n\u003cli\u003eLowers the car up to 50mm front and rear\u003c\/li\u003e\n\u003cli\u003eKit includes four links with seals\u003c\/li\u003e\n\u003cli\u003eShorten the front links to lower the car\u003c\/li\u003e\n\u003cli\u003eLengthen the rear links to lower the car\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTo match the height shown in the image, set the links to: front 78mm center to center, rear 138mm center to center.\u003c\/p\u003e\u003cp\u003eShips from our Vancouver shop — KORE SPEED is proudly Canadian-owned, with no surprise cross-border duties for Canadian buyers. Questions on fitment? Email \u003ca href=\"mailto:support@korespeed.com\"\u003esupport@korespeed.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":51579830173752,"sku":"CTS-SUS-2002","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/files\/CTS-LL-C8RS6.jpg?v=1765846729"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1775\/7947\/collections\/C8-RS6-CATLESS-DOWNPIPES-5_d3a776bd-004e-4f65-a8f5-f5f9dc611c4b.jpg?v=1779932071","url":"https:\/\/korespeed.com\/collections\/audi-c8-rs7-2020-parts-and-accessories.oembed","provider":"KORE SPEED","version":"1.0","type":"link"}